Account Flight case 0
ENESFR
DRIU WORKS / About

Drawn on set.

DRIU WORKS is the company founded by Andrés Aguilera, a cinema drone pilot with fourteen years in the air. Every part in this store began as a limit he hit on a real production, and was drawn, built and flown on set before it went on sale.

Name
Andrés Aguilera
Role
Founder, pilot, engineer
Company
DRIU WORKS
Base
Spain
Fig. 1 / Test bench 02The aircraft the first sheets were drawn for
DJI Inspire 3 / from the supplied 3D modelScale NTS
The pilot / RecordAndriu FPV / 2012 to today

Fourteen years of the shots other crews turn down.

“If the shot is difficult, even better. That’s where my work starts.”

Andrés Aguilera
14Years in the air

Cinema drone work since 2012, from open-prop FPV to full cinema payloads.

2×Million Dollar Challenge

Selected twice in GoPro’s global challenge, from more than 53,000 entries.

EUUrban flight authorisation

Complex urban operations in Madrid, Barcelona, Paris, Rome, London and Hamburg.

5Aircraft platforms

Each one a test bench for the parts in this store.

The fleet / Test benchesEvery part flies here first

The fleet is the test bench.

Nothing in the store is designed at a desk and shipped untested. Each part is fitted to the aircraft below and flown on real productions first, with RED, ARRI and full-frame bodies on board.

These bodies are in the hangar
PlatformUsed for
RAW FPVOpen-prop, 6K and 8K RAWHigh-speed automotive
DJI Inspire 3Full-frame 8K, stabilisedFocusLink, FocusLink PRO, PowerGimbal, Frames, GoggleLink
Protected FPVGuarded propsTalent and interiors
RAW FPV GimbalStabilised, two operatorsPrecise moves at speed, GoggleLink PRO
RAW FPV Heavy LiftFull cinema payloadsARRI and RED bodies
Method / Set to caseNo shortcuts

From a problem on set to a part in your case.

  1. On set

    A shot runs into the limit of the gear: a cable that can’t be there, a unit the budget doesn’t have, a gimbal that loses power at the wrong moment.

  2. On the sheet

    The fix is drawn to the millimetre in CAD, toleranced, and printed or machined in-house until it fits the first time.

  3. In the air

    It flies on real productions before it is offered to anyone. Nothing ships that hasn’t held up under pressure on a set.

  4. In the case

    Licensed per aircraft, controller or goggles, or held in the hardware, packed in Spain and shipped to your set.

DRIU WORKS / WorkshopProcess / NTS

Made in-house. Proven on set.

Design, machining, printing, electronics and code all happen under one roof, so a new revision goes from the sheet to a test flight without waiting on anyone. Nothing moves on to the store until it has held up on a real production.

IN-HOUSE R&DONE ROOFINPUTON SETA limit foundon a real shootDESIGNCADDrawn andtolerancedMAKECNC MACHININGHousings and mountsFDM PRINTINGFit checks and jigsSLA PRINTINGFine-detail partsELECTRONICSBoards, wiring, radioFIRMWAREWritten and flashedVERIFYBENCH TESTPowered and checkedFLIGHT TESTOwn fleet, five platformsVALIDATEREALSHOOTSPaid productionsHOLDSUP?NOBACK TO THE SHEET / NEXT REVISIONREV AREV BREV CYESRELEASEYOUR CASEINPUTON SETA limit found on a real shootIN-HOUSE R&DDESIGNCADDrawn and tolerancedMAKECNC MACHININGHousings and mountsFDM PRINTINGFit checks and jigsSLA PRINTINGFine-detail partsELECTRONICSBoards, wiring, radioFIRMWAREWritten and flashedVERIFYBENCH TESTPowered and checkedFLIGHT TESTOwn fleet, five platformsVALIDATEREAL SHOOTSPaid productionsHOLDSUP?NOBACK TO THE SHEET / NEXT REVISIONREV AREV BREV CYESRELEASEYOUR CASE
Design rulesApply to every sheet

The rules every part is drawn to.

  • The shot first.

    A part exists because a shot needed it. If it doesn’t make a shot possible, it isn’t drawn.

  • Paid once.

    No subscriptions and no renewals. What you buy keeps working.

  • One device, one licence.

    Each licence is issued for one installation, works offline and never expires. A new controller, a repair or a crash goes through a reviewed case, not a new purchase.

  • Flight stays untouched.

    FocusLink and Frames never send anything that affects how the aircraft flies.

  • Flown before it ships.

    Every part works on a real set before it leaves the workshop.

The work behind the parts

Commercials, film and music, for the brands that set the bar.

Andrés flies for global automotive, fashion, technology and entertainment brands, with the production companies that make their campaigns: car chases at speed, talent at arm’s length, interiors, and cities at night. DRIU WORKS turns what those sets demand into tools any crew can buy.

Checked / Sign-off

Every sheet in this store is checked and signed off by the founder before it is published. If it carries the DRIU mark, it has flown.

Back to the Cinema Store
Andrés AguileraFounder, pilot, engineer / DRIU WORKSCheckedA. AGUILERASep 2026